Search Button
Home   |   Contact Us
 
28 September 2018
New In Line fan - LINEAR
more details
07 February 2017
New Products - CVT HT series
more details
 
   
HEPA & ULPA FILTERS (EN 1822 classifications: H10 to U17)

Many types of HEPA & ULPA filters are available. Here below are just few examples.

All HEPA and ULPA filters are packed under cleanroom conditions. Each filter has specific technical characteristics depending on application.

 For special applications, conduct us for selection recommendations.

BioCel VXL & AstroCel VXL

 

AstroCel III 4000

 

AstroPak Metal

 

BioCel II

 

 

 

 

 



 BioCel VXL® and AstroCel VXL® are lightweight compact filters designed for use in industrial HVAC installations.
Their rigid design and pleated media pack with hot melt separators ensure delivery of desired air quality when used as last stage filter in the AHU.

EN 1822 classifications: H10
  to H13 

 Long service life.

 High media area - low
  pressure drop.

 Lightweight and easy to i
  install.



The filter displays excellent efficiency on fine particulate matter and is designed for use in high air volume applications up to 4000 m3/h.

Due to its high capacity the filter offers several benefits in new installations, fewer filters are required to handle the same volume of air compared to HEPA filters of the same size with a lower capacity.

EN 1822 classifications: H10
  to H14 

• 
4000 m3/h air volume saves
  space.

• 
Low energy consumption.



AstroPak filters owe their excellent air cleaning efficiency to their advanced design.

High quality anodized aluminium cell sides ensure a smooth, non-shedding construction, while a rigid mini-pleat media pack with thermoplastic separators provides high efficiency particulate air filtration at the


EN 1822 classifications: H13
  to H14 

 Non-shedding construction.

 “Leak free” construction.

Lowest possible resistance.

Additional benefits include:

 Recessed pack ensures easy
  handling.

 Installation with pleats in
  vertical or horizontal position.

 Also available with MDF cell
  sides.



BioCel II filters are designed for installations in which HEPA quality air filtration is required.

As a H11 classified air filter, BioCel II is ideal for upgrading an existing non-HEPA installation to a HEPA installation.

The filter has a one-piece gasket, alternative a knife-edge or fluid seal groove.

Typical areas of application include clean zones in the pharmaceutical, microelectronic and healthcare industries

EN 1822 classification: H11 

 One-piece gasket provides 
  leak tight seal

 Temperature limit: 70˚C.

 

Specifications.pdf

Specifications.pdf

Specifications.pdf

Specifications.pdf

AstroCel II Dry Seal

 

AstroCel II Fluid Seal

 

AstroCel II

 

PharmaGel Hood PHG



 AstroCel II one-piece gasket dry seal filters are designed for use in cleanrooms, cleanbenches, biohazard benches and other clean work stations. 

The filters are compact, lightweight and easy to install in open plenum, terminal and in-line housing systems and cleanbenches and offer many additional benefits:

EN 1822 classifications: H13
  to U17 

 Dedicated cleanroom and
  cleanbench filters

 One-piece gasket provides
  perfect seal

 Filters for ultra clean
  environments

 Factory tested to meet the
  most stringent legal and
  industry requirements.

 High efficiency safeguards
  processes, products and
  workers.

 Functional reliability: leak or
  scan tested.

 

 

 



The Filter

“AstroCel II Fluid Seal” filters feature an integral groove filled with gel at the air inlet side which ensures a perfect seal in housing systems. 

Like all AstroCel II type filters, they are compact, lightweight and easy to install - particularly in terminal hood and fan filter modules.

 EN 1822 classifications: H13
  to U17 

 Dedicated cleanroom filters

 Integral fluid groove provides
  perfect seal

 Filters for ultra clean
  environments

The filters offer the following benefits:

 Factory tested to meet the
  most stringent legal and
  industry requirements.

 High efficiency safeguards 
  processes, products and
  people.

 Functional reliability: leak or
  scan tested.

 

 

 



The Filter

The AstroCel II air filter is designed for use in cleanroom applications. The filter is available in classification H13, with an MPPS rating of 99.95% in accordance with EN1822.

This low depth filter comprises a high efficiency mini pleat glass fibre media pack housed in an anodized aluminized cell side frame with a faceguard on the air leaving side and a single flat gasket on the air entering side.

 EN 1822 classification: H13 

 High efficiency mini-pleat
  glass fibre media.

 Anodized aluminized cell side
  frame.



The Module

The PHG Hood is a terminal filter module equipped with a gel seal replaceable HEPA /ULPA filter.

The housing is made of corrosion resistant steel with a white powder coated epoxy finish and is fitted with a 4-way diffuser, swirl diffuser or perforated plate diffuser, finished in a matching white gloss. For neat appearance, the module has a concealed grille fixing.

To accommodate different installation situations, the PHG Hood type G is available with a circular top inlet, circular side inlet.

A differential pressure connection is included for room side testing. The module is available in mild steel as standard. A stainless steel execution is available as an option.

Unique gel seal execution.

Wide range of sizes available.

 2 inlet designs: circular top
  circular side.

 Rigid leak free construction.

 Differential pressure
  connection for room side
  testing.

Specifications.pdf

Specifications.pdf

Specifications.pdf

Specifications.pdf

TM Hood

TM Hood RSC

 

Operating Theaters



The Filter

The AstroCel TM Ceiling Hood is designed to meet the stringent air quality requirements of cleanrooms.

Hermetically sealed to prevent voids and leaks, the TM Hood can be used in individually ducted laminar and non-laminar cleanrooms.

The TM Hood is available in a dry seal one piece gasket and knife edge execution.

Dedicated cleanroom filter

 EN 1822 classes: H14, U15,
  U16 and U17 

Hermetically closed
  construction

 Knife edge and dry seal
  execution

 Filters for ultra clean
  environments

 



The Filter
 
The AstroCel TM RSC Ceiling Hood is designed to meet the stringent air quality requirements of cleanrooms.

The permanent ceiling hood AstroCel TM RSC comes in anodized extruded cell side construction with an aluminum top plate. An inlet collar with a height of 65 mm is available in a variety of sizes; the standard sizes are deep drawn. AstroCel II Fluid Seal filters are installed from the cleanroom side and positioned with 4 support strips.

The filter seals automatically with the permanent knife-edge in the hood.

 "Room Side Change” HEPA 
  and ULPA Terminal Filter Hood.

 Dedicated cleanroom filter.

 EN 1822 classes: H14, U15,
  U16 and U17. 

 Hermetically closed
  construction.

 Knife edge and dry seal
  execution

 Filters for ultra clean
  environments

The AstroCel TM RSC provides many user benefits including:

 Factory tested and certified
  filter.

 Easy room-side change of
  filter elements.

 Suspension points (optional)



Please visit the “operating theater” & “clean room components” sections

Specifications.pdf

Specifications.pdf

© Copyright  2011. All rights reserved  Designed and Developed by eBOS Technologies
 powered by WiseBOS